PRODUCTS SEARCH
TECHNICAL DESCRIPTION
PGRS type pipeline pump according to the standand JB/T6878-2006.
Used to delivery pipeline booster to solve the pipe low pressure problem.
The pump has the advantages of compact structure.
Small volume, beautiful appearance, small install area,
stable operation, long service life, high efficiency, low power consumption,
convenient installation and maintain etc.
The pump is composed of motor.mechanical seal and pump part.
With high quality 45# steel shaft, chrome plating processing
ensure the strength and corrosion resistance.
TECHNICAL DESCRIPTION
PGRS type pipeline pump according to the standand JB/T6878-2006.
Used to delivery pipeline booster to solve the pipe low pressure problem.
The pump has the advantages of compact structure.
Small volume, beautiful appearance, small install area,
stable operation, long service life, high efficiency, low power consumption,
convenient installation and maintain etc.
The pump is composed of motor.mechanical seal and pump part.
With high quality 45# steel shaft, chrome plating processing
ensure the strength and corrosion resistance.
APPLICATIONS
This series pump for pressurized water to high-rise buildings, garden irigation,
pipe pressure, cold and hot water circulation, flammable, explasive and
corrosive liquids, all kinds of boiler water supply, heating, chemical,
petroleum pipeline equipment recycling,Turbocharger matching.
1.PGRS hot water type suitable for industry heating, boiler temperature below 100 ℃.
MODEL DESCRIPTION
CONDITION
The pump can work normally and continuously under the following conditions;
1. Inlet pressure between 0.02mpa~0.3mpa.
2. the water quality is clean, not due to fiber or solid particles, the hot water is soft water;
3. the temperature of the medium: water is not lower than 0 C;
4. the ambient temperature is not more than +45 C;
5. the power frequency is 50Hz/60Hz, voltage is 220V/240V single- phase, three- -phase 380V/415V/460V/660V, rated voltage fluctuation range of ± 10%.
TECHNICAL PARAMETERS
TECHNICAL DESCRIPTION
PGRS type pipeline pump according to the standand JB/T6878-2006.
Used to delivery pipeline booster to solve the pipe low pressure problem.
The pump has the advantages of compact structure.
Small volume, beautiful appearance, small install area,
stable operation, long service life, high efficiency, low power consumption,
convenient installation and maintain etc.
The pump is composed of motor.mechanical seal and pump part.
With high quality 45# steel shaft, chrome plating processing
ensure the strength and corrosion resistance.
APPLICATIONS
This series pump for pressurized water to high-rise buildings, garden irigation,
pipe pressure, cold and hot water circulation, flammable, explasive and
corrosive liquids, all kinds of boiler water supply, heating, chemical,
petroleum pipeline equipment recycling,Turbocharger matching.
1.PGRS hot water type suitable for industry heating, boiler temperature below 100 ℃.
MODEL DESCRIPTION
CONDITION
The pump can work normally and continuously under the following conditions;
1. Inlet pressure between 0.02mpa~0.3mpa.
2. the water quality is clean, not due to fiber or solid particles, the hot water is soft water;
3. the temperature of the medium: water is not lower than 0 C;
4. the ambient temperature is not more than +45 C;
5. the power frequency is 50Hz/60Hz, voltage is 220V/240V single- phase, three- -phase 380V/415V/460V/660V, rated voltage fluctuation range of ± 10%.
TECHNICAL PARAMETERS
